Professional drilling process of concrete cutting in Tan Quy Tay
This method does not cause too much vibration and does not need water.
Using diamond drilling tools:
Can cut 1000mm thick concrete and can be used to drill concrete for floors, walls, saws to create grooves, demolish thick layers of concrete.
Hung Vy Concrete Drilling and Drilling Company is pleased to introduce customers to concrete cutting and drilling service in Tan Quy Tay.
Positioning the drill hole
The positioning step is usually assigned by the customer as desired, then the center of the hole is marked with a cross-proof wet ink. This is a very important job, helping drill the right position to drill.
You can use the stopper of bullet or hatch to hold the base. Statistics need to be fastened to help the base is stable, if the position of the drill surface is rough, we use anti-keeng bolts.
Execution of concrete core drilling
After capturing the base, we assemble the machine and the drill to position the hole. The stand will only be tightened after the drill has been positioned in the center of the hole.
Assemble and fix the machine
This is the main and most important job, so the machine moves slowly (especially with the new tip). When the nose has reached 2cm deep into the concrete, proceed slowly pressing the drill to the depth of the concrete. When touching iron should move slowly to ensure the rotation speed of the machine is stable.
Thank you for trusting and using khoan cắt bê tông đồng tháp service.
Bài viết được tham khảo và tổng hợp từ nhiều nguồn website trên Internet! Vui lòng phản hồi cho chúng tôi, nếu Bạn thấy các thông tin trên chưa chính xác.
SĐT: 0906 493 329 ( Viber) Zalo: 0947 083 082- Email: email@example.com